Topic: Settings - Tuning - Rounding Observation - Spin Off

Mon cher Mo d'Art,

Si vous pouviez m'écouter un instant, j'aimerais vous demander ce qui suit (en anglais):

  • Detune extended to +/- 100 cents currently this is +/- 50

  • Detune able to accept 0.000 resolution not rounded to whole numbers

  • Ability to load your own scala - I understand on-the-fly detuning is problematic at the moment

  • ability to pull out stops slowly for creative effect - this would affect the wind going to the pipe and flatten it - currently this can be controlled by CC

  • Ability to control air to whole organ for creative effect - ie holding a chord and switching off the blower produces a fun effect on the real beast!

  • All current stops in the range 8' to 2' to be extended 1 octave either side beyond C1<>C6, ie C0<>C7 to enable other footages to be selected not currently set - this could be enabled in settings - at present the sound just cuts off below the set range. I appreciate that for the mixtures and mutations this is neither practical nor desired.

Merci de m'avoir écouté. Bien à vous, DEZ

Re: Settings - Tuning - Rounding Observation - Spin Off

DEZ wrote:

[*]Detune extended to +/- 100 cents currently this is +/- 50[/*]

Settings - Tuning - Right click on note - Edit: Enter -100 or +100 cents... et voila!

Re: Settings - Tuning - Rounding Observation - Spin Off

Klest wrote:
DEZ wrote:

[*]Detune extended to +/- 100 cents currently this is +/- 50[/*]

Settings - Tuning - Right click on note - Edit: Enter -100 or +100 cents... et voila!

That seems to work - however it defaults to +/-50 as soon as you leave the page when pasting setting in. It does seem to work for manual input as you suggest. STRANGE

Last edited by DEZ (04-01-2025 08:43)