Topic: Playing with PianoTeq requires some finesse

Unlike the defaults on my Roland FP-30, the PianoTeq Defaults play differently, behave differently.

I basically came back from v6 to v7, a lot of practice in between, and now I'm back at v7 and it finally feels better.

Did anybody feel the same? In the beginning, I wasn't able to make it sound properly, without having 'knowledge'...

Re: Playing with PianoTeq requires some finesse

Maybe it's just a matter of velocity curves adjust (you can adjust the graphic curve with precision on pianoteq).

Or perhaps it's the fact pianoteq have more nuances/shades, more variables, more velocities per key , and you found it somewhat more difficult as you felt there was more variables to controll, like in a real piano.

Last edited by Beto-Music (19-12-2020 15:45)

Re: Playing with PianoTeq requires some finesse

I don't think there are too many variables to control on an acoustic.  One has to accept what is there unless it needs refurbishing, . . .apart from a squeaky loud pedal which can be oiled.

I'm playing all the right notes but not necessarily in the right order

Re: Playing with PianoTeq requires some finesse

In some way you are right, there is no much settings in a real piano, just some regulations to do.

But a real piano have all variables in the form of numbers of key velocities, and ressonances, so a mistake can be more noticeable on a acoustic than in a simple digital piano.

And half sustein pedal effect it's much more difficult in real piano.

peterws wrote:

I don't think there are too many variables to control on an acoustic.  One has to accept what is there unless it needs refurbishing, . . .apart from a squeaky loud pedal which can be oiled.

Last edited by Beto-Music (21-12-2020 21:33)

Re: Playing with PianoTeq requires some finesse

My experience with the built in grand on my Yamaha CP33 are that it plays a lot easier than a real grand.
With the built in sound, I can press the sustain pedal and play a lot of keys, without getting a blurred sound.
On a real instrument, I have to take a lot more care when using the sustain pedal.
And Pianoteq mimics a real grand in this behaviour.
When I switched from the internal sound to Pianoteq, I needed quite some time to get the sound right.
I think that OP experiences this, when he/she 'complains' that in the beginning Pianoteq doesn't sound better than the built in grand.

Have a nice day & happy playin'

Yamaha CP33 -- Scarlett 2i2 -- Yamaha HS7 / Sennheiser HD650 -- PTQ 8 Pro [Linux] -- Some instruments

Re: Playing with PianoTeq requires some finesse

Just learn how to play a piano, Pianoteq simulates a real grand very accurately so if you can get it down, playingon a real piano will sound just like playing on pianoteq.

Re: Playing with PianoTeq requires some finesse

A simple trick in Piantoeq to re-create an "easier to play" experience (esp. for new pianists or anyone wanting to get a 90s dpiano feel)..

Lower dynamic range (try around 24).

That's not to say it's an end goal or fix to a problem - but just worth trying if a beginner or trying to go for a 90s dpiano vibe.

Pianoteq Studio Bundle (Pro plus all instruments)  - Kawai MP11 digital piano - Yamaha HS8 monitors