Topic: How do you use Pianoteq?

Do you use it for live performance? Do you use it mainly in the studio? If in the studio, do you use it for live audio capture, or to process midi piano performances into a realistic piano sound, or both?

What is your signal chain in each case? (e.g., what is the flow of data within and between hardware -- not a general discussion of hardware you use itself, although it doesn't hurt to mention your specific hardware and software makes and models that you use in the signal chain)

How does Pianoteq integrate into your workflow? How often and in what scenarios do you use the standalone vs the plugin?

For me, I'm finding I use it most to process midi piano performances into a realistic piano sound, as embedded hardware digital piano sounds are getting good enough to not bug me for use in performance or throw off my (already hack) technique.  As my workflow prioritizes minimal "screen time" (because I get so much already), I find it far more convenient to just turn on the digital piano and start playing and capture the midi performance that I then pipe through Pianoteq later for sound generation or perhaps some note editing.

It is really fun to play in real time. But it's like the difference between my electric guitars and acoustic guitars: I'm much more likely to pick up an acoustic guitar in a pinch (or moment of inspiration), even if I'm technically hearing electric guitar sounds in my head. Those extra 2-4 steps of connecting additional equipment really matter. So I find I practice much more frequently in the "acoustic" domain and actually have to discipline myself to practice in the electric domain for those specific chops/sounds. But since "Pianoteq" emulates an acoustic sound already, it would be like me plugging in all my electric guitar equipment to just to run a (really, really nice sounding) acoustic guitar simulator.

For pianos I think it's different. Acoustic pianos are relatively expensive, bulky and difficult to maintain. And digital piano sounds used to be pretty crappy. But
1. the improvements in sound engines these last several years -- both higher sample qualities and the addition/integration of modeling algorithms for the aspects of a piano that are hard to reproduce through static high quality samples (hybrid engines) -- have been making leaps and bounds, and
2. coupled with improvements in acoustic speaker cabinet design in furniture-style DPs, as well as
3. the heads and shoulders of Pianoteq's own realism (and the improvement in CPU capacity since it first came out), I see Pianoteq more and more as a studio tool

Re: How do you use Pianoteq?

I use pianoteq mainly to play with my keyboard in real time at home for my own enjoyment (rarely within a DAW to record a performance with a made by me accompaniment). Therefore, I usually use the standalone version, as I use pianoteq as if it were (in combination with my keyboard and computer) simply a piano.

Last year I began to find out how much would a real piano cost me. I was thinking of maybe buying an upright as I wouldn’t be able to afford a Grand piano and there would be no way of being able to have it fit in the living room of my house.

But I finally decided to keep using my electric piano (midi keyboard) which fortunately has 88 keys with weighted hammer action (or the sort) and which is connected to a laptop computer which audio out is connected to an amplifier to which I have connected two fine and fairly big loudspeakers.

The thing is that many of the virtual pianos I have, being pianoteq my favourite for playing in real time, sound much better than any of the real upright pianos I tried playing at the piano stores which I visited (the pianos I could afford at least). I also took into account that real pianos need to be tuned periodically. And another thing that I considered is that because of having what I have, I can play using headphones not bothering any of the members of my family as they do whatever they ought to be doing while being around, nor will I disturb my neighbours. I can even play and practice at night with no risk of having complaints.

P.s,
I did not mention before and I am adding now that: for writing in music notation or transcribing a score I use Harmony Assistant (from Myriad), I have FL Studio but I seldom use it (just for fooling around and having fun), for what I might use a DAW (sequencer?) for I prefer RealBand (similar to Power Tracks Pro Audio from PGMusic too) and Band-in-a-Box (from PGMusic) to arrange and assemble accompaniments to play along with. To edit audio files I use Acoustica (from AconDigital). Anyway, everything that I do which might be related to making music is on the amateurish side.

Last edited by Alejandro55 (30-05-2020 04:49)

Re: How do you use Pianoteq?

I haven't owned a flat-top acoustic guitar in well over a decade. Even if I'm finger-picking, it's on a Tele or an LP. I can play anything on an electric guitar that I'd play on a flat-top. The converse is not true. My use of Pianoteq parallels that to a degree. While I do own an acoustic grand piano (actually I have one but I don't technically "own" it) I rarely uncover and play it. Tuning and regulation are a drag. So, I try to put at little wear and tear on the old C5 as possible. The combination of Pianoteq Pro and my Kawai MP11SE suit my needs. That is tenfold more so when recording. I rarely use the MP11SE's internal samples. Even if I'm layering instruments live, I'll use multiple instances of Pianoteq instruments in my DAW. So, piano-wise, it's Kawai, PreSonus  audio interface, workstation, Pianoteq Pro, and maybe Presonus Studio One Pro.

Kawai MP11SE / Pianoteq Pro Studio Bundle v7.5.2 (includes every Pianoteq instrument - 21 currently)

Re: How do you use Pianoteq?

For composition the workflow is Finale (for getting basic midi started) > Cubase (as a pianoteq host and mix solution) > Audition (for mastering) if I want to release it as a sample or recording, and for general playback, I just use the standalone.  I don't really give live performances anymore--I just record, and if I gave a live performance, I'd probably just go with whatever they had available for an acoustic, since very few venues have excellent MIDI instruments--they're much more likely to have a decent acoustic which is still better than a low-end MIDI keyboard.  That, and the general population doesn't really get impressed by someone walking onto stage to play a small stage keyboard in the way they are about someone walking up to a 9' concert grand--even if the sound is functionally identical.

I also work a lot with MIDI playback of piano rolls in PTQ for historical research, and for that I just use the standalone.  Personally, I'm similar to the other responses--yes I'd love to have half a dozen to a dozen concert grands that I can choose from at any time, but I don't even the space or funds for one!  And even if I did have an unlimited library of acoustic instruments at my disposal, I'd drive technicians insane with the number of constant nit-picks and changes I'd order to each one.  I'd be out a few thousand a month right there, and that's beyond the costs of the instruments, the acoustic space needed to hear them properly, and proper climate control systems too (which help but still require the best instruments to be tuned at least daily for proper and consistant concert quality).

Spotify: https://open.spotify.com/artist/2xHiPcCsm29R12HX4eXd4J
Pianoteq Studio & Organteq
Casio GP300 & Custom organ console

Re: How do you use Pianoteq?

ethanay wrote:

How does Pianoteq integrate into your workflow? How often and in what scenarios do you use the standalone vs the plugin?

As a composer, I'm more of an improviser, and in that way Pianoteq has set me free!

For me a recording session always starts with Pianoteq Standalone.

I have set the retention period of archived midi recordings to "a billion years", so I'm sure everything I play will be preserved.

I end up with a bunch of MIDI files identified by day, hour, minute, second.
When I have finished my recording session I close Pianoteq Standalone, open Reaper, create a track with Pianoteq as VSTi, and throw my suite of files into it.

Each midi file becomes a Reaper item, identified by an item number (There's a Reaper action to set that  automatically).

Since I'm far from being a virtuoso pianist, I play rather slowly, and my first operation in Reaper will be to speed up the playback speed of each item. I do this globally, on average I multiply the speed by 1.25 or 1.5 (sometimes more).
I can later go back to that setting, either speed it up again, or slow it down.
When that's done, I get a track with holes between items, I have a specific action to remove those holes globally.

And then I can start the editing work in each item, in the piano roll editor.
My main editing work deals with duration, timing of notes, velocity and sustain pedal.

At the end I render my track to FLAC in Reaper and send it to Hearthis...

Between Pianoteq's first hit and the upload to Hearthis there can be a lot of work and time, but sometimes it goes much faster...
My latest publication "Reluctances"* started with 40 minutes of Pianoteq in small pieces, the harvest of two days ... There were five or six hours of editing work...
* see "Recordings featuring Pianoteq and Organteq"

Last edited by Gaston (11-06-2020 09:39)

Re: How do you use Pianoteq?

Great responses, thank you for sharing folks! It gives me a lot of food for thought.

I have to disagree about electric vs acoustic guitar @psterrett! (testing to see if @ works) I compose for both (clean and distortion on electric). Everything I can and do play on electric across genres I play on acoustic, but I don't think electric can handle a lot of the more complex fingerpicking stuff all that well because of the magnetic pickups. I would need to add a lot of complexity in harmonic content and overtones and resonance to feel satisfied in that domain, I think. Maybe there are some acoustic simulators that do that. But I generally prefer to feel acoustic soundwaves hit me from the instrument rather than a speaker... I feel the same about steel string vs nylon. As much as I LOVE nylon, I can play my guitar concerto on either (sounds better on the nylon), but there are a lot of things that just don't translate to nylon string (or electric). For me.

I try to stay away from the digital-like realm for as long as possible. It's something one of my teachers hammered into me. If I go into notation (used to be Encore, now is MuseScore) too quickly during composition then I will likely switch the creative side off and the analytical side on, which is death to my creative process. So by the time I'm ready to notate or record, I have a composition more or less fully internalized (maybe with some notes here and there on paper). An idea typically unfolds and leads me on a journey, as long as I am willing and able to follow it. When I do notate, it is first usually a custom shorthand I do on scratch paper, often because I don't have any staff paper immediately handy!  e.g., if I'm out and about. I find it most difficult to remember the rhythmic feel, I can remember notes pretty specifically. So many nights I go to bed with an idea, I think, "I'll remember it next morning!" and I wake up, and all the notes are there, but they don't sound right!

It would be impossible for me to responsibly own an acoustic piano. Even if I could afford to buy it and maintain it (which I can't) it would have to go against an outside wall in a space with fluctuating humidity and temperature.

My biggest problem with Pianoteq is realistic sound reproduction. As a said above, it is very different for me to hear sound from an amp or speaker than from the instrument.

I only play piano for composition purposes, rarely performance. It'll be a while before I can get those chops back (chronic illness stuff...). So I will be selling my stage piano and, when ready, will buy a compact digital piano. My criteria is that it must sound "good enough" to just turn on and play without annoying me, must have a good full-range sound system, and have some midi recording facilities. I can't always guarantee that I'll have my laptop (shared with my fiancee) available to run through Pianoteq.

My workflow is generally > idea > rhythm tracks and song parts > structure > arrangement and instrumentation > some form of notation (whether a lyric sheet, or a lead sheet, or full score) > demo recording > rework the track > real recording

I'm trying really hard to get back to a place in life where I can do the whole process again. It has been 15 years or so (almost half my lifetime! Sheesh)...I have a stockpile of stuff. I have a 30 minute guitar concerto I have yet to record or notate...composed back in 2015. available only in my head and through my hands...Am almost healthy enough, and almost have the rest of my life cleared up and uncluttered so I can focus on the things that truly matter (health, relationships, music, writing, regenerative agriculture), but there is a lot of work to dig myself out of holes I've gotten into.

Love hearing how other people work. Always gives me food for thought. Thank you for sharing!

Re: How do you use Pianoteq?

I use Pianoteq within Gig Performer for both home and live performance. Within Gig Performer I can seemlessly combine multi instances of PTQ with any other VST instruments, effects etc and have full midi control over them all via custom racks that are so easy to create.

KawaiMP11SE KorgPA4X CubasePro10.5 GigPerformer Pteq7Pro IvoryStway B Komplete Omnishphere

Re: How do you use Pianoteq?

ethanay wrote:

Do you use it for live performance? Do you use it mainly in the studio? If in the studio, do you use it for live audio capture, or to process midi piano performances into a realistic piano sound, or both?

What is your signal chain in each case? (e.g., what is the flow of data within and between hardware -- not a general discussion of hardware you use itself, although it doesn't hurt to mention your specific hardware and software makes and models that you use in the signal chain)

How does Pianoteq integrate into your workflow? How often and in what scenarios do you use the standalone vs the plugin?

For me, I'm finding I use it most to process midi piano performances into a realistic piano sound, as embedded hardware digital piano sounds are getting good enough to not bug me for use in performance or throw off my (already hack) technique.  As my workflow prioritizes minimal "screen time" (because I get so much already), I find it far more convenient to just turn on the digital piano and start playing and capture the midi performance that I then pipe through Pianoteq later for sound generation or perhaps some note editing.

It is really fun to play in real time. But it's like the difference between my electric guitars and acoustic guitars: I'm much more likely to pick up an acoustic guitar in a pinch (or moment of inspiration), even if I'm technically hearing electric guitar sounds in my head. Those extra 2-4 steps of connecting additional equipment really matter. So I find I practice much more frequently in the "acoustic" domain and actually have to discipline myself to practice in the electric domain for those specific chops/sounds. But since "Pianoteq" emulates an acoustic sound already, it would be like me plugging in all my electric guitar equipment to just to run a (really, really nice sounding) acoustic guitar simulator.

For pianos I think it's different. Acoustic pianos are relatively expensive, bulky and difficult to maintain. And digital piano sounds used to be pretty crappy. But
1. the improvements in sound engines these last several years -- both higher sample qualities and the addition/integration of modeling algorithms for the aspects of a piano that are hard to reproduce through static high quality samples (hybrid engines) -- have been making leaps and bounds, and
2. coupled with improvements in acoustic speaker cabinet design in furniture-style DPs, as well as
3. the heads and shoulders of Pianoteq's own realism (and the improvement in CPU capacity since it first came out), I see Pianoteq more and more as a studio tool

I am very new on the topic of playing the piano. My main instrument is playing the bass guitar but I try now also to compose some own songs. Some years ago I was searching a digital piano for my daughter but the sound of those devices were not really realistic. Inspired from the great piano sounds which you can find on the old ABBA records my dream was to find a device which I can use for homerecording and also for composing. Then a good friend give me the hint to take a look on Pianoteq ....and that's it - I am exited. My goal at the moment is to use it on a "standallone"-Expander which I am connecting to a Master-Keyboard (88 keys) - as easily as possible to use. I want to use it simply to try out some musical ideas and also for recording......maybe on stage in the future.

Re: How do you use Pianoteq?

I have a Bechstein Concert 8, with a silent piano (Kurzweil sounds, but older than 10 years). I wasn't satisfied with the sound of the silent piano anymore, so I've built a little Pianoteq-Raspberry Pi 4-Box, connected via Midi/USB-adapter cable.
After fiddling around with the velocity curve a bit, I'm very happy with this combination.
But I've played on stage as well. Using my Kawai ES 110 as keyboard.

Re: How do you use Pianoteq?

ethanay wrote:

... If I go into notation (used to be Encore, now is MuseScore) too quickly during composition then I will likely switch the creative side off and the analytical side on, which is death to my creative process. So by the time I'm ready to notate or record, I have a composition more or less fully internalized (maybe with some notes here and there on paper). An idea typically unfolds and leads me on a journey, as long as I am willing and able to follow it.

That's a very interesting point of view. I kind of feel the same way between the open, creative side of things, and the more critical, analytical side.

ethanay wrote:

if I'm out and about. I find it most difficult to remember the rhythmic feel, I can remember notes pretty specifically. So many nights I go to bed with an idea, I think, "I'll remember it next morning!" and I wake up, and all the notes are there, but they don't sound right!

That has happened to me too. I take for granted that if it's worthwhile, I'll remember and continue to work on (or play with) an idea, so I drop it (that is, I stop thinking about it and intentionally forget about it for the time being), but sometimes later, if it comes back to mind, I can't remember the original rhythmic structure or some other  important structural element(s).

ethanay wrote:

I only play piano for composition purposes, rarely performance. It'll be a while before I can get those chops back (chronic illness stuff...). ... Am almost healthy enough, and almost have the rest of my life cleared up and uncluttered so I can focus on the things that truly matter (health, relationships, music, writing, regenerative agriculture), but there is a lot of work to dig myself out of holes I've gotten into.

I can agree with all of that, and it's interesting to hear about another person's story. My health issue was an aggressive cancer, now in remission so far. But I had to reassess and simplify my life too. I'm curious what "regenerative agriculture" means.

Do you have a some of your creative work online (at YouTube, SoundCloud, etc.) that other people can access and listen to?

Best wishes in your ongoing experience and personal journey.

Last edited by Stephen_Doonan (12-06-2020 02:17)
--
Linux, Pianoteq Pro, Organteq

Re: How do you use Pianoteq?

Hi there.  I have been playing the piano for nigh on half a century so it is a complete mystery to me why I remain such a stunningly poor pianist. However, tinkling the ivories does give me immense pleasure and keeps me from bugging the family. I am a very recent Pianoteq user, having just bought the pro version a couple of weeks ago. I have been through a succession of digital pianos, firstly an old semi -weighted 88 key Casio, then an actually rather lovely Yamaha GranTouch GT2 that I now regret selling and most recently moving on to Kawai.  I currently have an MP11 in my office and a CS11 in the house.  I have to say I have absolutely no regrets with the MP11, I find the keyboard action just lovely. I also have a Roland Integra 7 synthesiser.

Pianoteq is housed on a Surface Pro 7 laptop and its sound is output into my home hi-fi system, which has the benefit of two large open backed Spatial Audio speakers that do provide a beautiful and enveloping sound. I like the fact that I can record the keystrokes that I play so any ditty that has a minute amount of merit I can then save as a MIDI file and take into Musescore.  I am pretty much the only listener, as once I get in front of people nerves abound and I’m pretty much unable to play anything.  I don’t have a DAW although I have quite a lot of PC tech as I think I’m probably just a little too old to try and get my head around working out how to use one, rather than learning how to use the piano.

I really like the sounds that I’m getting from Pianoteq.  To my ears it is better than the Kawai samples, which frankly were pretty good in the first place IMHO. My only issue at the moment is a slight latency but I’m hoping I can fix with the purchase of a MOTU M4 audio interface to place it somewhere in the system. I can tell the latency is there not just from my own sense as I play but if I also have the internal sound of the Kawai MP11 sounding at the same time you can detect that very small echo.

Pianoteq 7 Pro / Surface Pro7
Kawai MP11 / Roland Integra 7 / Focusrite 18i20 3G / Genelec 8341 & 7350 SAM

Re: How do you use Pianoteq?

BTMASS, just a thought but I would think latency should be ok with your setup. Asio4All (free to download) set to 128 samples gives low latency.

I found no improved performance with a Zoom USB 3 audio interface so I use Asio4All without question.

And regarding your post ethanay, I have gone back to using a music manuscript book, pencil (rubber tipped) first before final ink. The best way to compose.

Pianoteq is sounding so great and very inspiring to play, Steinway Model B wide for the last month, really haven't wanted to change this preset! I will, at the end of a writing session sometimes play back a 'recently played' to make sure everything is as it should be. When completed and I'm fully practiced I will video a performance.

I no longer edit my audio (midi) as this seemed unnatural, I prefer mistakes knowing it's my honest effort. I found in the past, editing wrong notes more difficult than actual playing also.

Last edited by MeDorian (11-06-2020 22:57)

Re: How do you use Pianoteq?

Stephen_Doonan, Hope your doing good and feeling well, all the best, Nick

Last edited by MeDorian (11-06-2020 23:33)

Re: How do you use Pianoteq?

Hi MeDorian - with the best will in the world, I hope you're wrong ;-) and the MOTU M4 makes some difference, although looking at the specs for the Zoom USB 3 it does look very similar in its capabilities (ulp!).  I already use ASIO4All and have followed the advice of Molten Music on YouTube to reduce the latency by making sure the Surface Pro is doing all it can to help.  Fingers crossed!!


MeDorian wrote:

BTMASS, just a thought but I would think latency should be ok with your setup. Asio4All (free to download) set to 128 samples gives low latency.

I found no improved performance with a Zoom USB 3 audio interface so I use Asio4All without question.

Pianoteq 7 Pro / Surface Pro7
Kawai MP11 / Roland Integra 7 / Focusrite 18i20 3G / Genelec 8341 & 7350 SAM

Re: How do you use Pianoteq?

BTMASS wrote:

Hi MeDorian - with the best will in the world, I hope you're wrong ;-) and the MOTU M4 makes some difference, although looking at the specs for the Zoom USB 3 it does look very similar in its capabilities (ulp!).  I already use ASIO4All and have followed the advice of Molten Music on YouTube to reduce the latency by making sure the Surface Pro is doing all it can to help.  Fingers crossed!!


MeDorian wrote:

BTMASS, just a thought but I would think latency should be ok with your setup. Asio4All (free to download) set to 128 samples gives low latency.

I found no improved performance with a Zoom USB 3 audio interface so I use Asio4All without question.

If 48khz is set in Pianoteq with 128 samples with Asio4All, then 2.4 ms latency (top of my head, long time since I looked). This is my preference to avoid jitter, 64 samples is possible though.

My HP Omen PC has an i5.

Also I use Hi Fi in preference to powered speakers and an audio interface is really not required for me, stereo from PC to 2x amps plus a powered sub. Although multi channel outputs with Pianoteq would be interesting, the Zoom was only two channels.

I have a feeling there might be some setup issue if latency is detected with 128 samples? I'm not great on computers but someone on this forum will have more knowledge to help I'm sure.

Keep me posted, Nick

Edit: Quick thought! Do you have latency through headphones? Also make sure no audio effects are activated on your laptop.

Another issue could be if you are using an AV amplifier (especially the more modern ones). If it's an AV then try to find a setting like '2 Channel Audio'. This, on a Yamaha AV I had recently was the only setting on the amp that would bypass the effects processor, all other settings had latency. Some earlier AV amps, like my very old Yamaha only process the surround speaker outputs and doesn't have the latency problems.

Last edited by MeDorian (12-06-2020 01:13)

Re: How do you use Pianoteq?

Will do MeDorian.  Unfortunately, MOTU products (in the UK at least) are pretty much all backordered, so it won't arrive until the end of this month.  Hopefully!

Pianoteq 7 Pro / Surface Pro7
Kawai MP11 / Roland Integra 7 / Focusrite 18i20 3G / Genelec 8341 & 7350 SAM

Re: How do you use Pianoteq?

I play in an Evangelical Church. Use for gospel music with band. We play from Smooth Jazz, pop rock, worship music etc.

Respeito, Esforço e Sabedoria

Re: How do you use Pianoteq?

i´m nothing a Pianist, and anyway not a producer.

I just play pianoteq live at home !
standalone, or in a host just with a added Reverb and probably a delay too,
Or: i create wild FX setups in a host, using gig Performer3 now as my new discovery,
......and using Pianoteq as my sound-base to create from there very synthetic and electronic sounding , ...well, Synth-Sounds, haha.

i use mostly the K2 model since it has a enhanced Keyboardrange, and i used to reprogramm some things for my (electronic/wilder) uses.

if your looking for host porgramms:
H-AU is a freeware host for mac, its perfect for simple things and some midi CC programming.
Gig Performer then is a living dream becoming true. ( check plugin alliance for sales / right now is still one going on i belive )
For example do i create a Piano main Audio path, but create also a second audio path dedicated to go thru delays and reverbs,
and would add there a tiny bit of EP sound ( pianoteq too) plus a even more tiny bit of a syhth sound, beside the main Piano also been mixed to the FX path.
i can create sounds that would outperform any of todays Hardware this way. Mainly in direction Ambients, Piano Ambients, soundscapes,
or just playing Piano that has the "soundscape" as a very subtle underlying "soundambience" present.


for off screen playing: i just shut down my 40" screen, donne !

Re: How do you use Pianoteq?

My first post!
I play jazz piano for fun n my living room with a Yamaha CP-33 as controller.
On linux and windows. Pianoteq is the only piano app I know that supports linux.
On Windows, I use Kontakt upright bass and Cubase Groove Agent Simon Phillips library as a drummer.
I'm more a guitar and sax player than a pianist.

Francoise

Last edited by FranceWise (01-07-2020 12:31)

Re: How do you use Pianoteq?

FranceWise wrote:

My first post!
I play jazz piano for fun n my living room with a Yamaha CP-33 as controller.
On linux and windows. Pianoteq is the only piano app I know that supports linux.
On Windows, I use Kontakt upright bass and Cubase Groove Agent Simon Phillips library as a drummer.
I'm more a guitar and sax player than a pianist.

Francoise

Welcome to the forum! Nice wordplay on your name, I was sure that's was it was when I saw it pass...

Re: How do you use Pianoteq?

Bienvenue!

FranceWise wrote:

My first post!
I play jazz piano for fun n my living room with a Yamaha CP-33 as controller.
On linux and windows. Pianoteq is the only piano app I know that supports linux.
On Windows, I use Kontakt upright bass and Cubase Groove Agent Simon Phillips library as a drummer.
I'm more a guitar and sax player than a pianist.

PT 7.3 with Steinway B and D, U4 upright, YC5, Bechstein DG, Steingraeber, Ant. Petrov, Kremsegg Collection #2, Electric Pianos and Hohner Collection. http://antoinewcaron.com

Re: How do you use Pianoteq?

I'm a new user on pianoteq and I mainly use it with the standalone on a PC. A roland Fp-10 as a controller and an old very good seinnheiser HD540 on my head, choosing the "Steingraeber warm" preset ( my favorite at the moment). Playing and playing is a wonderfull experience and I enjoy playing hours and hours despite my poor pianistic technic...
Note than a good setting of the velocity curve is fondamental... and obviously a good sustain pedal...
On the other hand the playing on my JMLAB loudspeakers (however very good for music listening) don't convince me very well, I can't immerse myself in the music as with my headphone ( has anybody the same experience ?)
In conclusion I really love pianoteq... I've never had so good sensations with my acoustic upright)
(Please excuse me for my english)
Yves (France)

Re: How do you use Pianoteq?

Gilles wrote:
FranceWise wrote:

My first post!
I play jazz piano for fun n my living room with a Yamaha CP-33 as controller.
On linux and windows. Pianoteq is the only piano app I know that supports linux.
On Windows, I use Kontakt upright bass and Cubase Groove Agent Simon Phillips library as a drummer.
I'm more a guitar and sax player than a pianist.

Francoise

Welcome to the forum! Nice wordplay on your name, I was sure that's was it was when I saw it pass...


I thought it would go unnoticed. But since you're from Quebec city... I'm not sure I'm always quite wise.
Thank you for welcoming me, Gilles!

Last edited by FranceWise (01-07-2020 19:29)

Re: How do you use Pianoteq?

FranceWise wrote:
Gilles wrote:
FranceWise wrote:

My first post!
I play jazz piano for fun n my living room with a Yamaha CP-33 as controller.
On linux and windows. Pianoteq is the only piano app I know that supports linux.
On Windows, I use Kontakt upright bass and Cubase Groove Agent Simon Phillips library as a drummer.
I'm more a guitar and sax player than a pianist.

Francoise

Welcome to the forum! Nice wordplay on your name, I was sure that's was it was when I saw it pass...


I thought it would go unnoticed. I'm not sure I'm always quite wise.
Thank you for welcoming me!

Hehe, excellent, I hadn't noticed it

Re: How do you use Pianoteq?

Philippe Guillaume wrote:
FranceWise wrote:
Gilles wrote:

Welcome to the forum! Nice wordplay on your name, I was sure that's was it was when I saw it pass...


I thought it would go unnoticed. I'm not sure I'm always quite wise.
Thank you for welcoming me!

Hehe, excellent, I hadn't noticed it

It's because of the underlying Québecois accent: Françoaïse instead of Françoaase.

Last edited by Gilles (01-07-2020 19:43)

Re: How do you use Pianoteq?

So, I guess that to make it more "international French", it could have been "FranceWas"...but that doesn't sound very alive

Gilles wrote:

It's because of the underlying Québecois accent: Françoaïse instead of Françoaase.

PT 7.3 with Steinway B and D, U4 upright, YC5, Bechstein DG, Steingraeber, Ant. Petrov, Kremsegg Collection #2, Electric Pianos and Hohner Collection. http://antoinewcaron.com

Re: How do you use Pianoteq?

I use Pianoteq for a combination of Midi to audio for recording and as a Midi plug-in instrument for Sibelius. I use Pianoteq to drive my Roland LX-17. The Roland has a nice piano sound, but I was never satisfied with it. There are harsh sounds and other annoyances, and I wanted something better, besides my teacher acquired an 1821 Freznel and I went searching for that piano model and discovered Pianoteq which caught my attention. After that discovery in mid-2018 discovery, I haven't stopped using it since.

With the ability to convert Midi to audio easily, this became my go-to for recording and on much better pianos than the generic Roland instrument. The fact that there can be multiple takes without needing to ensure that the audio-in cable is plugged into the soundcard, makes this extremely convenient.

At the moment I'm working on a memorial music program in memory of my late mother who passed away in December 2018. Here's two of the pieces I've recorded. This program has taken me a lot longer to work on due to many reasons, but when it's completed, I hope it's the best it can be. Here's a couple of the completed works both played on the C. Bechstein digital grand, I modified a bit.

Alexandre Goria (1823-1860) Caprice-Nocturne Op. 6  in A-flat
https://www.dropbox.com/s/ddtm7lqs8f8hh...t.wav?dl=0

Louis Gottschalk (1829 - 1869) Morte!! She's dead!
https://www.dropbox.com/s/yw4hi5vi9n01p...1.wav?dl=0

Recently I got involved in a project with some friends using Pianoteq and Noteperformer to recreate orchestral and chamber music digitally. My use of Pianoteq Standard and later Pro lead to two music-friends upgrading and purchasing the program as well. For all of us this is a whole new world for us with digital music that's both fascinating and frustrating at the same time.

All in all, Pianoteq is part of my life daily due to its versatility even though I own other acoustic keyboard instruments including a grand piano, clavichord, and harpsichord.