Topic by Normhart

  • Avatar
  • Normhart
  • Member
  • Offline
  • Registered: 12-05-2019
  • Posts: 26

Topic: Studiologic SLP-3 multi pedal

Hi, I just started using a Studiologic SLP-3 3-pedal controller with my SL88 Studio midi controller and need a bit of help with setting it up. The sustain (rightmost pedal) works fine with no setup but the other two currently don’t do anything. I realize these need to be configured somewhere in the settings but am not clear as to how to go about it. Thanks for any help on getting this going.


*** Update: sorry please disregard the above, I was able to find a post that covered this. Apologies for not checking more thoroughly first!

Last edited by Normhart (12-05-2019 14:51)

Reply by J9YXMXPaul Caruso

  • Avatar
  • J9YXMXPaul Caruso
  • Member
  • Offline
  • Registered: 01-06-2019
  • Posts: 1

Re: Studiologic SLP-3 multi pedal

I am having the exact same problem. Can you direct me to the post that solved this for you?
Thanks

Reply by jamiecw

  • Avatar
  • jamiecw
  • Member
  • Offline
  • Registered: 15-10-2018
  • Posts: 38

Re: Studiologic SLP-3 multi pedal

Hi - are you you connecting the SLP3-D to the 4th pedal input and setting it as such inside the SL Editor app under the right Program number etc?

If you are (doing the above) and still have no luck getting it to work, you might have a faulty pedal as I had the same and had it replaced...the way I noticed it was faulty was by unscrewing the metal jacket of the TRS port and connecting it that way and it worked so there was something loose within the wiring..