When you want to utilize more than a usual two (2) stereo outputs in Pianoteq Standalone, you click on the Options button; that appears in the upper right portion of the main software interface. Once within the Pianoteq Options window, you highlight Devices at the upper left. With Devices highlighted, in the middle of the window you will see Output (and its selection arrows) as you select your output device, your audio interface. After you select your device from the pop-up list, the chosen device's available channels appear beneath its name (that is) in the pane showing Active output channels. You must check, physically, each additional channel you intend to activate, if you indeed intend to activate more than a usual single stereo pair; you will activate your channel from the scrollable list of available output channels —of the Active output channels!
Since I use a Focusrite Safire Pro the channels available to me are: Mon 1, Mon 2, Line 3, Line 4, Line 5, Line 6, SPDIF L, and SPDIF R, as listed in my scrollable list of Active output channels, which is, underneath Devices in my Pianoteq Options window, of course.
As per your Focusrite manual, be sure to open your mixer software, mix, and route your channels as explained in the manual (this is) either beforetime or afterwards, generally.
Last edited by Amen Ptah Ra (22-09-2017 16:59)
Pianoteq 8 Studio Bundle, Pearl malletSTATION EM1, Roland (DRUM SOUND MODULE TD-30, HandSonic 10, AX-1), Akai EWI USB, Yamaha DIGITAL PIANO P-95, M-Audio STUDIOPHILE BX5, Focusrite Saffire PRO 24 DSP.