Topic by Beto-Music

  • Avatar
  • Beto-Music
  • Member
  • Offline
  • Registered: 02-05-2007
  • Posts: 2,783

Topic: What about 7.1 sound for pianoteq?

I was just wondering...

Would be a advantage to include 7.1 sound for pianoteq ?

Or for piano 7.1 is not very relevant compared to 5.1 ?



According this video 7.1 is superior:

http://www.youtube.com/watch?v=LQ6X8Ruials


Anyway, I do not know why they call 5.1 or even 7.1 as 3D sound.
After all 3D need 3 dimentions, and 5.1 and 7.1 all have only 2 dimentions, cause there is no speakers on the ground or in the roof.
It's a very good system, but not really true 3D.

Last edited by Beto-Music (07-12-2012 23:43)

Reply by EvilDragon

  • Avatar
  • EvilDragon
  • Member
  • Offline
  • From: Croatia
  • Registered: 27-06-2008
  • Posts: 3,994

Re: What about 7.1 sound for pianoteq?

Beto-Music wrote:

After all 3D need 3 dimentions, and 5.1 and 7.1 all have only 2 dimentions, cause there is no speakers on the ground or in the roof.

But the sound dissipates and disperses and it's possible to simulate sounds coming from the roof or the floor.

Hard work and guts!

Reply by Luc Henrion

  • Avatar
  • Luc Henrion
  • Member
  • Offline
  • Registered: 02-05-2007
  • Posts: 932

Re: What about 7.1 sound for pianoteq?

"the sound dissipates and disperses", that's why good old 2.0 stereo is already 3D !!!
Agreed, 5.1 is sometimes useful. Sometimes ;-)

Luc Henrion's Website

Reply by Beto-Music

  • Avatar
  • Beto-Music
  • Member
  • Offline
  • Registered: 02-05-2007
  • Posts: 2,783

Re: What about 7.1 sound for pianoteq?

Stereo 3D???

Háaa háaa...  háaaa...

In many cases in 5.1 if something go from the righ to to left top, the sensation is that the sound go through the head, and not above it.
They created some special mics to try to fake it.

Anyway you cannou change the lateral inclination angle of your head (line between left to right ear).

It's a good sound system if you have a fine speakers and amplification.  But it's not true 3D.

If it was really true 3D, why they are working in a 22.1 system?????

Last edited by Beto-Music (08-12-2012 17:44)

Reply by Luc Henrion

  • Avatar
  • Luc Henrion
  • Member
  • Offline
  • Registered: 02-05-2007
  • Posts: 932

Re: What about 7.1 sound for pianoteq?

yes, "kind of a" joke ;-)
but not entirely: your room (where the sound disperses) IS really 3D, ins't it...?

Luc Henrion's Website

Reply by LTECpiano

  • Avatar
  • LTECpiano
  • Member
  • Offline
  • From: Columbia, SC
  • Registered: 05-05-2011
  • Posts: 697

Re: What about 7.1 sound for pianoteq?

I don't want to digress regarding the beta testing of presets but thought that if anyone wants to catch a little history of the most serious of engineering audio folks in the past . . here are a couple of links back outside of Pianoteq.

Link 1:  This link describes what has been referred to as the "Hafler Hook-up".  David Hafler, a top audio engineer of the late 1960's and 1970's came up with this simple circuit.  (Read carefully before you start grabbing alligator clip leads).  I have had fun experimenting with this simple surround sound gimmick:

http://sound.westhost.com/project18.htm

Link 2:  Michael Gerzon . . U.K. audio pioneer.  This is a more lengthy history of "spatial sound" technology during a similar time span as Hafler . . This article is quite lengthy but incredibly interesting to an audio techy.  Gerzon was definitely "ahead of the curve".

http://www.michaelgerzonphotos.org.uk/i...oneer.html

Cheers . . . Lanny

LTECpiano's Website