bonjour,
est-il possible de modifier le point de split sur le preset: shigeru bass/piano split
j'aimerai augmenter la tessiture de la basse pour pouvoir jouer des notes plus dans les aigus
je vous remercie pour votre aide
You'll need Pianoteq Pro, because the "bass" is accomplished by setting a few design parameters (hammer noise, impedance etc) to extreme values in the low register (which makes it sound more like a plucked bass than a piano). With Pro, you can edit these to change the range of keys affected by these extreme values
Is that really the case? Because I've looked and looked again at the Note Edit options (in Pianoteq Pro), I've changed the few that seem to be different between the bass notes and the others, but the timbre of both (bass and piano) is still extremely different...It seems to me there's something fishy going on there, and something similar could be said about the patches with piano and strings.
You'll need Pianoteq Pro, because the "bass" is accomplished by setting a few design parameters (hammer noise, impedance etc) to extreme values in the low register (which makes it sound more like a plucked bass than a piano). With Pro, you can edit these to change the range of keys affected by these extreme values
..It seems to me there's something fishy going on there, and something similar could be said about the patches with piano and strings.
For the piano with strings pads, an extra layer was added to the preset (the first layer appears to be the standard piano model, and the second layer the piano modified to sound like orchestral strings). Quite a few parameters were changed in order to simulate the strings pad. The impedance was raised, so was the frequency range and its cutoff slope, and there were other changes.
https://i.imgur.com/iAzfa0L.png
https://i.imgur.com/a5zL7Aa.png
https://i.imgur.com/YyIYnAs.png
--- --- ---
