<?xml version="1.0" encoding="utf-8"?>
<feed xmlns="http://www.w3.org/2005/Atom">
	<title type="html"><![CDATA[Modartt user forum - Early reflections modeling in Pianoteq?]]></title>
	<link rel="self" href="https://forum.modartt.com/extern.php?action=feed&amp;tid=13599&amp;type=atom"/>
	<updated>2026-11-17T15:11:18Z</updated>
	<generator>PunBB</generator>
	<id>https://forum.modartt.com/viewtopic.php?id=13599</id>
		<entry>
			<title type="html"><![CDATA[Early reflections modeling in Pianoteq?]]></title>
			<link rel="alternate" href="https://forum.modartt.com/viewtopic.php?pid=1010538#p1010538"/>
			<content type="html"><![CDATA[<p>Hello everyone,</p><p>I&#039;m a sound engineer and producer based in Stockholm (Nomad Musik). I trained at Studio Blue, a school whose approach to recording builds on Stig Carlsson&#039;s work on early reflections, in line with Leo Beranek&#039;s research on the importance of the initial time delay gap (ITDG) in concert halls.</p><p>In my work, I take the decisive impact of early reflections into account by working on the placement of the instrument and the microphones in the room, following three principles:<br />- A reflective, diffusing surface behind the piano produces the desired reflection, roughly 15 to 30 ms after the direct sound. At this delay, the reflection blends with the sound of the instrument creating an intimate sound that enriches the sound of the instrument without causing unwanted interference that distorts the sound. The diffusion spreads this reflection into many smaller reflections and avoids the sound of a flat surface, which is perceived as cold and harsh.<br />- Reflections that arrive too early, before about 6 ms (for example from the floor), are avoided or attenuated to prevent unwanted interference.<br />- The rest of the room is damped, so that everything arriving after 30 ms stays at a low level.<br />Reverb is then added digitally for the reverb tail only.</p><p>In an earlier thread on this forum (&quot;How is the room simulated in Pianoteq?&quot;), Philippe Guillaume explained that the acoustic field is generated by the soundboard and its immediate surroundings – the lid and the floor – and that the room is then taken into account by the reverb. This leads me to three questions:</p><p>1. As I understand it, the model does not include the walls of the room. Is that still the case in the current version of Pianoteq?</p><p>2. If so, could someone confirm or correct my understanding of the reverb module?<br />&nbsp; &nbsp;a) Pre-delay delays the signal before convolution, and therefore also the early reflections contained in the impulse response.<br />&nbsp; &nbsp;b) Room size changes the character of the reverb. Does it also change when the early reflections arrive?<br />&nbsp; &nbsp;c) The Tail / Early reflections control sets the level balance between early reflections and tail. Where is the boundary between the two?<br />&nbsp; &nbsp;d) Finally, does the reverb take the microphone positions into account?</p><p>3. One limitation I see is that an impulse response cannot reflect the complex directivity of a piano. Since Pianoteq already models the acoustic radiation of the piano, it would be fascinating to be able to include early reflections from the room in the model. Are there any plans in that direction?</p><p>Thanks in advance to anyone who takes the time to answer, and congratulations to Modartt on the remarkable work done with Pianoteq.</p><p>Best regards,<br />Xavier Guérillon<br />Nomad Musik – nomadmusik.se</p>]]></content>
			<author>
				<name><![CDATA[Xavier G]]></name>
				<uri>https://forum.modartt.com/profile.php?id=11219</uri>
			</author>
			<updated>2026-11-17T15:11:18Z</updated>
			<id>https://forum.modartt.com/viewtopic.php?pid=1010538#p1010538</id>
		</entry>
</feed>
